Part Number:VCA810
Hello,
Our customer evaluating VCA810 with input voltage= -1V to +1V and gain=0dB, however, the output voltage has clamped.
I have heard their operation conditions and settings and examined it by TINA-TI.
The result had the same as the customer had (see attached file).
I believe VCA810 can be used with 1Vpp and 0dB by checking datasheet Figure11,
please let me know why the output voltage had clamped and could not output 1Vpp .
Thanks and best regards,
Hiro
(Please visit the site to view this file)